Myers® Sumps and Sewages
myers-sumps-and-sewages
Head : 18 ft (5.5 m)
4/10 Horsepower
The SRM4 Non-clog Pump is the most reliable 4/10 Horsepower Residential Sewage Pump available today. The SRM4 is a plumbers/contractors dream ... it will not clog! Its recessed impeller design allows 2" solids to pass freely through the volute without the chance of jamming the impeller. The SRM4 series pump has a national field-proven record of reliability. Look to your Myers distributor for the answer to your residential sewage handling needs ... and across the counter will be the Myers mini non-clog, the SRM4. It works for you!
Advantages By Design
Durable motor will deliver many years of reliable service.
Head : 27 ft (8.23 m)
1/2 Horsepower
The Myers MW50 Series Sewage Pumps provide big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial sewage applications, and passes a full 2" diameter solid. The MW50 is constructed of only the highest quality corrosion resistant materials - cast iron, stainless steel and engineered thermoplastics - for many years of service in harsh sewage environment. The MW50 is available in manual models for use with external controls or automatic models with piggyback mechanical float.
Advantages By Design
Two vane impeller design provides maximum efficiency
Head : 70 ft (21.3 m)
Single and Double Seal
The heavy-duty Myers MW Series Sewage Pumps are designed for use in light commercial and residential raw sewage applications. MW pumps will pass a full 2” sphere. The enclosed two-vane impeller provides high efficiency pumping and will handle stringy trashy solids normally found in raw sewage applications. Ideal for a variety of sewage applications ranging from private household to light commercial installations. Available in double seal configuration for extended motor life.
Advantages By Design
Ideal for use in residential and light commercial sewage applications
Head : 32 ft (9.75 m)
4/10 HP
The Myers ME40 series effluent pumps are one of the most efficient 4/10 HP pumps on the market today. The enclosed two-vane impeller provides the flow and head required for today's dosing systems and the many tough drainage applications. The ME40 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and thermoplastics - for many hours of service in the harsh effluent environment. The ME40 is available in automatic models with piggyback or built-in mechanical float switch or manual models for use with external controls for precise dosing.
Advantages By Design
Two-vane impeller design provides maximum dosing efficiency
Head : 124 ft (37.8 m)
1/2 and 1 HP
The Myers P Series Effluent Pumps are designed specifically for today's multi-pump pressure collection and septic tank effluent pumping (S.T.E.R) systems and high head drainage applications. The P Series effluent pumps with their high efficiency single vane, enclosed impellers provide the steep non-overloading performance curves ideal for pressure collection and S.T.E.P systems. Myers 1/2 and 1 horsepower P Series pumps deliver more capacity at higher heads than most 1,1 1/2 and 2 horsepower pumps in their class. Myers P Series pumps are constructed of only the highest quality corrosion resistant materials like cast iron, stainless steel and thermoplastics to assure that they will perform for years to come in the harsh effluent environment end drainage applications.
Advantages By Design
Optimum performance for use in multi-pump pressure collection and S.T.E.P. systems
Capacity : 36 gpm (136 lpm)
Head : 36 ft (11.0 m)
ME3F
Capacity : 66 gpm (250 lpm)
Head : 32 ft (9.75 m)
High Head (ME3H) and High Flow (ME3F)
The Myers ME3 series are rugged 1/3 hp Effluent Pumps designed for demanding effluent pumping jobs where dependability is a must. The ME3 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and engineered thermoplastics - to provide many years of service in the harsh effluent environment. The ME3 is available with a recessed impeller for high-head applications or an enclosed impeller for high-flow applications - both will pass a full 3/4" spherical solid. The ME3 is available in automatic models with piggyback mechanical float switch or manual models for use with external controls.
Advantages By Design
Durable motor will deliver many years of reliable service.
Head : 480 ft
1/2, 3/4, 1 and 1 1/2 HP
8, 12, 20, 25, 30 and 35 GPM
4" Diameter Submersibles
Myers high head filtered effluent pumps are designed specifically for high pressure applications. The high performance, high head pumps are proven to be cost effective solutions for pumping filtered effluent from processed wastewater systems.
Advantages By Design
Head : 23 ft (7.0 m)
High Temperature 4/10 HP
The Myers S40HT Submersible High Temperature 4/10 hp Sump Pump is designed for hot water applications up to 195ºF. The S40HT series is all cast iron construction with stainless steel fasteners. High temperature pumping applications include boiler blowdown pits, condensate pits and hot water transfer. The S40HT offers a cast iron vortex impeller which can pass a full 3/4" spherical solid. The S40HT is available in an automatic model with a piggyback mechanical float switch or a manual model for use with external controls.
Advantages By Design
Durable motor will deliver many years of reliable service.
Head : 34 ft (10 m)
Simplex and Duplex Explosion-Proof Packages
Submersible Sump Pump/Control Panel
Myers SX50 and SX50H are rugged 1/2 hp Explosion-proof Submersible Sump Pumps designed for many commercial, municipal, or industrial applications. The SX50 and SX50H are U.L. and CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations. These pumps are designed to pump contaminated water with a wide range of pollutants listed under the U.L., CSA listing. The pump package includes Myers intrinsically safe control panel.
Myers CEX control panels feature:
SIMPLEX 1Ø
SX50-21PS (high flow)
SX50H-21 PS (high pressure)
DUPLEX 1Ø
SX50-21PD (high flow)
SX50H-21PD (high pressure)
SIMPLEX 3Ø
SX50-23PS (high flow)
SX50H-23PS (high pressure)
DUPLEX 3Ø
SX50-23PD (high flow)
SX50H-23PD (high pressure) Untitled-EC28.jpg
Head : 23 ft (7 m)
The Myers SSM33I is a rugged, heavy duty cast iron 1/3 hp Submersible Pump designed for demanding drainage jobs. The SSM33I's recessed, vortex impeller provides a clear, unobstructed passage in the volute case for superior solids handling. Its 1/2" solids handling capability allows it to be used in a wide variety of drainage and effluent pumping applications. Heavy duty cast iron construction ensures that the SSM33I will perform for years to come in most installations.
Advantages By Design
Durable motor will deliver many years of reliable service.
Head : 95 ft (28.9 m)
1/2 through 1 1/2 HP
The Myers ME series Effluent Pumps are designed specifically for today's effluent pressure distribution mounds, trenches and high flow drainage applications. The ME series effluent pumps with their efficient two vane, enclosed impellers, provide the ideal performance for optimum dosing. ME Series pumps are constructed of only corrosion resistant materials like cast iron, stainless steel and thermoplastics to assure that they will perform for years to come in the harsh effluent environment and drainage applications.
Advantages By Design
Ideal for use in mound and trench pressure distribution systems
Head : 33 ft (10 m)
4/10 HP
The Myers ME40AG Series Submersible Pumps are one of the most efficient 4/10 hp sump pumps on the market today. These pumps are engineered specifically for the vigorous demands created by today's agricultural cooling systems. A modified design delivers an enclosed two-vane impeller suited to provide optimal flow and head for cooling systems. The ME40AG is constructed of only the highest quality corrosion resistant materials; like epoxy coated cast iron, stainless steel and thermoplastics for many hours of continuous service in the harsh sump environment.
Advantages By Design
Two-vane impeller design provides maximum dosing efficiency
Head : 25 ft (7.62 m)
1/3 Horsepower
Available with vertical mechanical switch (not shown)
The F. E. Myers 1/3 hp S33 submersible sump pump builds on the Myers tradition of innovation and quality. The S33 features our interchangeable, positive sealing socket design for easy replacement of both power and mercury-free mechanical float and vertical switch cords, and our recessed impeller. This 1/3 hp pump achieves a shut-oil head of 25 feet and a maximum flow of 32 gpm. Its 3450 rpm oil-filled permanent split capacitor (PSC) motor provides superior heat dissipation and built-in overload protection. Accurate shaft alignment and easy serviceability are assured by this permanent split capacitor motor, which is protected from water damage by a carbon-ceramic mechanical shaft seal and additional lip seal. The operating mode is easily switched from automatic to manual without removing the motor cap, by inserting a shunt plug. The S33 is also available with a vertical mechanical switch. In this configuration, the S33 can be installed in a 10 1/2" diameter sump.
Advantages By Design
Durable motor will deliver many years of reliable service
Myers® SRM4 Series Residential Sewage Pumps
Capacity : 95 gpm (360 lpm)Head : 18 ft (5.5 m)
4/10 Horsepower
The SRM4 Non-clog Pump is the most reliable 4/10 Horsepower Residential Sewage Pump available today. The SRM4 is a plumbers/contractors dream ... it will not clog! Its recessed impeller design allows 2" solids to pass freely through the volute without the chance of jamming the impeller. The SRM4 series pump has a national field-proven record of reliability. Look to your Myers distributor for the answer to your residential sewage handling needs ... and across the counter will be the Myers mini non-clog, the SRM4. It works for you!
Advantages By Design
Durable motor will deliver many years of reliable service.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Overload protected shaded pole motor eliminates starting switches.
- Recessed vortex impeller provides minimal radial loading for long bearing life.
- Wide-angle piggy-back float switch for maximum draw down. (Automatic models)
- Pump can be operated manually by unplugging piggy-back switch and plugging pump directly into outlet (Automatic models).
- Recessed vortex impeller operates completely out of volute and provides free flow through passage for solids and liquids.
Myers® MW50 Series 2" Solids Handling Sewage Pumps
Capacity : 135 gpm (510 lpm)Head : 27 ft (8.23 m)
1/2 Horsepower
The Myers MW50 Series Sewage Pumps provide big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial sewage applications, and passes a full 2" diameter solid. The MW50 is constructed of only the highest quality corrosion resistant materials - cast iron, stainless steel and engineered thermoplastics - for many years of service in harsh sewage environment. The MW50 is available in manual models for use with external controls or automatic models with piggyback mechanical float.
Advantages By Design
Two vane impeller design provides maximum efficiency
- Enclosed design for high efficiency pump.
- Eliminates possibility of jamming between impeller and volute.
- Passes a full 2 inch solid.
- Original performance can be restored if wear occurs by replacing volute seal ring.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Permanent split capacitor motor eliminates starting switches and relays which are prone to fail.
- Positive sealing, quick connect power cord and piggyback float switch make replacement simple if service is ever necessary.
- Field tested, wide angle, mercury-free mechanical float switch provides maximum draw down. (Automatic models only.)
- Long flexible Type 6 seal provides high pressure sealing with improved seal face protection by location.
- Lower ball bearing eliminates sleeve bearing wear and significantly reduces motor wear.
- Low amp draw from the efficient PSC motor means less heat build-up.
Myers® MW Series 2" Solids Handling Sewage Pumps
Capacity : 165 gpm (641 lpm)Head : 70 ft (21.3 m)
Single and Double Seal
The heavy-duty Myers MW Series Sewage Pumps are designed for use in light commercial and residential raw sewage applications. MW pumps will pass a full 2” sphere. The enclosed two-vane impeller provides high efficiency pumping and will handle stringy trashy solids normally found in raw sewage applications. Ideal for a variety of sewage applications ranging from private household to light commercial installations. Available in double seal configuration for extended motor life.
Advantages By Design
Ideal for use in residential and light commercial sewage applications
- High efficiency, two-vane, enclosed impeller provides ideal pump performance.
- Impeller passes full 2 inch solids.
- Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
- Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
- Motors have on winding current and temperature sensitive overload. (Single phase only.)
- Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
- Motor is held in place by four screws. Easily removed if service is ever needed.
Myers® ME40 Series Effluent and Drain Water Pumps
Capacity 60 gpm (227 lpm)Head : 32 ft (9.75 m)
4/10 HP
The Myers ME40 series effluent pumps are one of the most efficient 4/10 HP pumps on the market today. The enclosed two-vane impeller provides the flow and head required for today's dosing systems and the many tough drainage applications. The ME40 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and thermoplastics - for many hours of service in the harsh effluent environment. The ME40 is available in automatic models with piggyback or built-in mechanical float switch or manual models for use with external controls for precise dosing.
Advantages By Design
Two-vane impeller design provides maximum dosing efficiency
- Enclosed design for high efficiency pumping.
- Full 3/4 inch passageway.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
- Positive sealing, quick connect float and switch cords make replacement simple if service is ever necessary.
- Field tested, wide angle, mercury-free mechanical float switch provides maximum draw down. (Automatic models only)
- Piggyback equipped automatic models allow pump to be run manually by unplugging switch and plugging pump directly into outlet.
- Long, flexible Type 6 seal provides high pressure sealing with improved seal face protection.
- Lower ball bearing eliminates sleeve bearing wear and holds the mechanical seal steady.
Myers® P50 and P100 Series Effluent S.T.E.P. Pumps
Capacity : 60 gpm (227 lpm)Head : 124 ft (37.8 m)
1/2 and 1 HP
The Myers P Series Effluent Pumps are designed specifically for today's multi-pump pressure collection and septic tank effluent pumping (S.T.E.R) systems and high head drainage applications. The P Series effluent pumps with their high efficiency single vane, enclosed impellers provide the steep non-overloading performance curves ideal for pressure collection and S.T.E.P systems. Myers 1/2 and 1 horsepower P Series pumps deliver more capacity at higher heads than most 1,1 1/2 and 2 horsepower pumps in their class. Myers P Series pumps are constructed of only the highest quality corrosion resistant materials like cast iron, stainless steel and thermoplastics to assure that they will perform for years to come in the harsh effluent environment end drainage applications.
Advantages By Design
Optimum performance for use in multi-pump pressure collection and S.T.E.P. systems
- High efficiency, single vane, enclosed impeller provides non-overloading performance over entire range. Outperforms most pumps in its class.
- Impeller passes 3/4 inch spherical solids.
- Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
- Double tandem seal option for extra motor protection, tough effluent pumping applications.
- Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
- On-winding current and temperature sensitive overload to protect against costly burnout due to overload.
- Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
- Motor is held in place by four screws. Easily removed if service is ever needed.
Myers® ME3 Series Submersible Effluent Pumps
(2) ME3HCapacity : 36 gpm (136 lpm)
Head : 36 ft (11.0 m)
ME3F
Capacity : 66 gpm (250 lpm)
Head : 32 ft (9.75 m)
High Head (ME3H) and High Flow (ME3F)
The Myers ME3 series are rugged 1/3 hp Effluent Pumps designed for demanding effluent pumping jobs where dependability is a must. The ME3 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and engineered thermoplastics - to provide many years of service in the harsh effluent environment. The ME3 is available with a recessed impeller for high-head applications or an enclosed impeller for high-flow applications - both will pass a full 3/4" spherical solid. The ME3 is available in automatic models with piggyback mechanical float switch or manual models for use with external controls.
Advantages By Design
Durable motor will deliver many years of reliable service.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
- Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life.
- Field tested, wide angle, mercury-free mechanical float switch for maximum draw down. (Automatic piggyback models only).
- Automatic pump models can be operated manually by unplugging piggyback switch and plugging pump directly into outlet.
- Passes a full 3/4" solid.
Myers® High Head Filtered Effluent Pumps
(18) Capacity : 50 gpmHead : 480 ft
1/2, 3/4, 1 and 1 1/2 HP
8, 12, 20, 25, 30 and 35 GPM
4" Diameter Submersibles
Myers high head filtered effluent pumps are designed specifically for high pressure applications. The high performance, high head pumps are proven to be cost effective solutions for pumping filtered effluent from processed wastewater systems.
Advantages By Design
- High pressure capacity.
- Corrosion resistant design for long life.
- CSA-CUS listed.
(25 and 35 GPM CSA only.) - Dependable field proven motor.
- Stainless steel construction
- Built-in overload and electric surge protection
- Replaceable 10' jacketed power cord
- Hermetically sealed windings
- Continuous duty rating - Frequent cycling capabilities.
- 1/2 and 3/4 HP - 300 starts/24 hours
- 1 and 1 1/2 HP -100 starts/24 hours - Powerful, yet lightweight.
- Easy handling and installation.
Myers® S40HT Series Submersible Sump Pumps
Capacity : 52 gpm (197 lpm)Head : 23 ft (7.0 m)
High Temperature 4/10 HP
The Myers S40HT Submersible High Temperature 4/10 hp Sump Pump is designed for hot water applications up to 195ºF. The S40HT series is all cast iron construction with stainless steel fasteners. High temperature pumping applications include boiler blowdown pits, condensate pits and hot water transfer. The S40HT offers a cast iron vortex impeller which can pass a full 3/4" spherical solid. The S40HT is available in an automatic model with a piggyback mechanical float switch or a manual model for use with external controls.
Advantages By Design
Durable motor will deliver many years of reliable service.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
- Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life.
- Wide angle, mercury-free, high temperature mechanical float switch for maximum draw down. (Automatic piggyback models only).
- Automatic pump model can be operated manually by unplugging piggyback switch and plugging pump directly into outlet.
- Cast iron vortex impeller passes a full 3/4" solid.
Myers® SX50 and SX50H Series Packages
(4) Capacity : 95 gpm (360 lpm)Head : 34 ft (10 m)
Simplex and Duplex Explosion-Proof Packages
Submersible Sump Pump/Control Panel
Myers SX50 and SX50H are rugged 1/2 hp Explosion-proof Submersible Sump Pumps designed for many commercial, municipal, or industrial applications. The SX50 and SX50H are U.L. and CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations. These pumps are designed to pump contaminated water with a wide range of pollutants listed under the U.L., CSA listing. The pump package includes Myers intrinsically safe control panel.
Myers CEX control panels feature:
- NEMA 4X enclosure with inner door
- Separate pump and control circuit breaker
- intrinsically safe module for floats
- H-O-A switch
- Run, seal leak, and alarm light
- Motor starter and capacitor
- U/L 913
- Solids handling up to 2"
- Service stations
- "Quick-lube" stations
- Car/truck washes
- Truck docks
- Military base
SIMPLEX 1Ø
SX50-21PS (high flow)
SX50H-21 PS (high pressure)
DUPLEX 1Ø
SX50-21PD (high flow)
SX50H-21PD (high pressure)
SIMPLEX 3Ø
SX50-23PS (high flow)
SX50H-23PS (high pressure)
DUPLEX 3Ø
SX50-23PD (high flow)
SX50H-23PD (high pressure) Untitled-EC28.jpg
Myers® SSM33I Cast Iron Submersible Sumps and Effluent Pumps
Capacity : 31 gpm (117 lpm)Head : 23 ft (7 m)
The Myers SSM33I is a rugged, heavy duty cast iron 1/3 hp Submersible Pump designed for demanding drainage jobs. The SSM33I's recessed, vortex impeller provides a clear, unobstructed passage in the volute case for superior solids handling. Its 1/2" solids handling capability allows it to be used in a wide variety of drainage and effluent pumping applications. Heavy duty cast iron construction ensures that the SSM33I will perform for years to come in most installations.
Advantages By Design
Durable motor will deliver many years of reliable service.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Shaded pole motor eliminates starting switches.
- Recessed vortex impeller provides free flow-through passage for solids and liquid with minimal radial loading for long bearing life.
- Automatic models available with piggy-back float or vertical switch. (Both mercury free)
- Pump can be operated manually by unplugging piggy-back switch and plugging pump directly into outlet (Automatic models).
- Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life and resist corrosion.
Myers® ME Series Effluent Pumps
(8) Capacity : 120 gpm (454 lpm)Head : 95 ft (28.9 m)
1/2 through 1 1/2 HP
The Myers ME series Effluent Pumps are designed specifically for today's effluent pressure distribution mounds, trenches and high flow drainage applications. The ME series effluent pumps with their efficient two vane, enclosed impellers, provide the ideal performance for optimum dosing. ME Series pumps are constructed of only corrosion resistant materials like cast iron, stainless steel and thermoplastics to assure that they will perform for years to come in the harsh effluent environment and drainage applications.
Advantages By Design
Ideal for use in mound and trench pressure distribution systems
- High efficiency, two vane, enclosed impeller provides ideal performance for most efficient dosing.
- Impeller passes full 3/4 inch solids.
- Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
- Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
- Motors have on winding current and temperature sensitive overload. (Single phase only.)
- Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
- Motor is held in place by four screws. Easily removed if service is ever needed.
Myers® ME40AG Series Submersible Agricultural Pumps
Capacity : 70 gpm (265 lpm)Head : 33 ft (10 m)
4/10 HP
The Myers ME40AG Series Submersible Pumps are one of the most efficient 4/10 hp sump pumps on the market today. These pumps are engineered specifically for the vigorous demands created by today's agricultural cooling systems. A modified design delivers an enclosed two-vane impeller suited to provide optimal flow and head for cooling systems. The ME40AG is constructed of only the highest quality corrosion resistant materials; like epoxy coated cast iron, stainless steel and thermoplastics for many hours of continuous service in the harsh sump environment.
Advantages By Design
Two-vane impeller design provides maximum dosing efficiency
- Enclosed design for high efficiency pumping.
- Vane design capable of producing high head and flow.
- Full 3/4 inch passageway.
- Oil-filled motor has been improved for maximum heat dissipation and continuous bearing lubrication.
- Overload protected, permanent split capacitor motor delivers smooth efficient power.
- Generously sized motor easily handles the application with power to spare.
- Long flexible Type 6 seal provides high pressure sealing with improved seal face protection.
- Lower ball bearing eliminates sleeve bearing wear and holds the mechanical seal steady.
- Low amp draw from the efficient PSC motor means less heat build-up.
- Optional suction screen included to prevent debris from entering the pump.
Myers® S33 Series Submersible Sump Pumps
Capacity : 32 gpm (145 lpm)Head : 25 ft (7.62 m)
1/3 Horsepower
Available with vertical mechanical switch (not shown)
The F. E. Myers 1/3 hp S33 submersible sump pump builds on the Myers tradition of innovation and quality. The S33 features our interchangeable, positive sealing socket design for easy replacement of both power and mercury-free mechanical float and vertical switch cords, and our recessed impeller. This 1/3 hp pump achieves a shut-oil head of 25 feet and a maximum flow of 32 gpm. Its 3450 rpm oil-filled permanent split capacitor (PSC) motor provides superior heat dissipation and built-in overload protection. Accurate shaft alignment and easy serviceability are assured by this permanent split capacitor motor, which is protected from water damage by a carbon-ceramic mechanical shaft seal and additional lip seal. The operating mode is easily switched from automatic to manual without removing the motor cap, by inserting a shunt plug. The S33 is also available with a vertical mechanical switch. In this configuration, the S33 can be installed in a 10 1/2" diameter sump.
Advantages By Design
Durable motor will deliver many years of reliable service
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- PSC motor eliminates starting switches.
- Recessed vortex impeller operates completely out of volute. Provides free flow through passage for solids and liquid, and has minimal radial loading for long bearing life.
- If service is ever necessary, positive sealing, quick-disconnect power and switch cords make replacement simple.
- Choice of wide-angle mercury-free mechanical float switch for maximum drawdown (built-in or piggyback), or vertical mechanical switch which allows installation in small 10W sumps.
Myers® Packaged Simplex Sewage Systems
Package includes the following:- SRM4PC-1 4/10 HP sewage pump.
- 18" x 30" structural foam sewage basin.
- 18" solid structural foam cover with 2" discharge flange, vent flange suitable for 2" or 3" vent, or split steel with 2" or 3" vent.
- 2" full-swing check valve.
- 4" inlet hub.
- PVC discharge pipe TOE
