Search our Catalog:
Search
The answer is yes what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Sumps and Sewages > Item # ME40  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # ME40, Myers® ME40 Series Effluent and Drain Water Pumps


Myers® ME40 Series Effluent and Drain Water Pumps

larger image
Capacity 60 gpm (227 lpm)
Head : 32 ft (9.75 m)

4/10 HP

The Myers ME40 series effluent pumps are one of the most efficient 4/10 HP pumps on the market today. The enclosed two-vane impeller provides the flow and head required for today's dosing systems and the many tough drainage applications. The ME40 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and thermoplastics - for many hours of service in the harsh effluent environment. The ME40 is available in automatic models with piggyback or built-in mechanical float switch or manual models for use with external controls for precise dosing.

Advantages By Design
Two-vane impeller design provides maximum dosing efficiency
  • Enclosed design for high efficiency pumping.
  • Full 3/4 inch passageway.
Durable motor will deliver many hours of reliable service
  • Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
  • Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
The ME40 is designed for many hours of maintenance free operation
  • Positive sealing, quick connect float and switch cords make replacement simple if service is ever necessary.
  • Field tested, wide angle, mercury-free mechanical float switch provides maximum draw down. (Automatic models only)
  • Piggyback equipped automatic models allow pump to be run manually by unplugging switch and plugging pump directly into outlet.
  • Long, flexible Type 6 seal provides high pressure sealing with improved seal face protection.
  • Lower ball bearing eliminates sleeve bearing wear and holds the mechanical seal steady.




Specifications  · Construction Material  · Agency Approvals

Specifications

Head
32 ft
9.75 m

Solids Handling Capacity
3/4 in
19 mm

Liquids Handling
Domestic Effluent & Drain Water

Intermittent Liquid Temperature
up to 140 ºF
up to 60 ºC

Motor Electrical Data
115 volt 12 amp, 1Ø, 60 Hz
4/10 hp, 1600 rpm, shaded pole, oil-filled
230 volt, 6 amp, 1Ø, 60 Hz
4/10 hp, 1600 rpm, shaded pole, oil-filled

Acceptable pH Range
6 to 9

Specific Gravity
0.9 to 1.1

Viscosity
28 to 35 SSU

Minimum Sump Diameter (Simplex)
24 in
61 cm

Minimum Sump Diameter (Duplex)
36 in
91.4 cm

Speed
1600 rpm

Power
4/10 hp

Capacity
60 gpm
227 lpm


Construction Material

Motor Housing Material
Cast Iron, class 30, ASTM 48

Motor Bearing Material
Ball Bearing, Lower Sleeve, Top

Enclosed Impeller Material
Engineered Thermoplastic

Power Cord Material
10 ft. 16/3 SJTW/SJTW-A
20 ft. 16/3 SJTW/SJTW-A

Mechanical Shaft Seal Material
Carbon/Ceramic, Type 6

Volute Material
Thermoplastic

Fasteners Material
300 series SST


Agency Approvals

Agency Approvals


 MORE IMAGES 

·  Dimensions (Myers® ME40 Series Effluent and Drain Water Pumps)

·  Pump Performance (Myers® ME40 Series Effluent and Drain Water Pumps)

·  Specifications (Myers® ME40 Series Effluent and Drain Water Pumps)


 DOWNLOADS 

ME40 Series Effluent and Drain Water Pumps
(PDF, 272KB)


Request Quote