Rapid Pump & Meter Service Co., Inc.
285 Straight Street
P.O. Box AY
Paterson, NJ, 07509 USA
Phone:973.345.5600 • Fax: 973.345.0301
Email: info@servicer.com
• Website:
www.rapidservice.com
|
|
|
Item # ME40, Myers® ME40 Series Effluent and Drain Water Pumps
|
|
|
|
|
|
Capacity 60 gpm (227 lpm)
Head : 32 ft (9.75 m)
4/10 HP
The Myers ME40 series effluent pumps are one of the most efficient 4/10 HP pumps on the market today. The enclosed two-vane impeller provides the flow and head required for today's dosing systems and the many tough drainage applications. The ME40 is constructed of only the highest quality corrosion resistant materials - like cast iron, stainless steel and thermoplastics - for many hours of service in the harsh effluent environment. The ME40 is available in automatic models with piggyback or built-in mechanical float switch or manual models for use with external controls for precise dosing.
Advantages By Design
Two-vane impeller design provides maximum dosing efficiency- Enclosed design for high efficiency pumping.
- Full 3/4 inch passageway.
Durable motor will deliver many hours of reliable service- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail.
The ME40 is designed for many hours of maintenance free operation- Positive sealing, quick connect float and switch cords make replacement simple if service is ever necessary.
- Field tested, wide angle, mercury-free mechanical float switch provides maximum draw down. (Automatic models only)
- Piggyback equipped automatic models allow pump to be run manually by unplugging switch and plugging pump directly into outlet.
- Long, flexible Type 6 seal provides high pressure sealing with improved seal face protection.
- Lower ball bearing eliminates sleeve bearing wear and holds the mechanical seal steady.
|
|
|
|
|
|
Head
|
|
32 ft
9.75 m
|
|
|
|
Solids Handling Capacity
|
|
3/4 in
19 mm
|
|
|
|
Liquids Handling
|
|
Domestic Effluent & Drain Water
|
|
|
|
Intermittent Liquid Temperature
|
|
up to 140 ºF
up to 60 ºC
|
|
|
|
Motor Electrical Data
|
|
115 volt 12 amp, 1Ø, 60 Hz
4/10 hp, 1600 rpm, shaded pole, oil-filled
230 volt, 6 amp, 1Ø, 60 Hz
4/10 hp, 1600 rpm, shaded pole, oil-filled
|
|
|
|
Acceptable pH Range
|
|
6 to 9
|
|
|
|
Specific Gravity
|
|
0.9 to 1.1
|
|
|
|
Viscosity
|
|
28 to 35 SSU
|
|
|
|
Minimum Sump Diameter (Simplex)
|
|
24 in
61 cm
|
|
|
|
Minimum Sump Diameter (Duplex)
|
|
36 in
91.4 cm
|
|
|
|
Speed
|
|
1600 rpm
|
|
|
|
Power
|
|
4/10 hp
|
|
|
|
Capacity
|
|
60 gpm
227 lpm
|
|
|
|
|
|
|
|
|
|
Agency Approvals
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
