Search our Catalog:
Search
The answer is yes what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Sumps and Sewages > Item # MW  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # MW, Myers® MW Series 2" Solids Handling Sewage Pumps


Myers® MW Series 2 in Solids Handling Sewage Pumps

larger image
Capacity : 165 gpm (641 lpm)
Head : 70 ft (21.3 m)

Single and Double Seal

The heavy-duty Myers MW Series Sewage Pumps are designed for use in light commercial and residential raw sewage applications. MW pumps will pass a full 2” sphere. The enclosed two-vane impeller provides high efficiency pumping and will handle stringy trashy solids normally found in raw sewage applications. Ideal for a variety of sewage applications ranging from private household to light commercial installations. Available in double seal configuration for extended motor life.

Advantages By Design
Ideal for use in residential and light commercial sewage applications
  • High efficiency, two-vane, enclosed impeller provides ideal pump performance.
  • Impeller passes full 2 inch solids.
  • Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
Durable motor will deliver many years of reliable service.
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
  • Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
  • Motors have on winding current and temperature sensitive overload. (Single phase only.)
The MW series sewage pumps are designed for years of maintenance free operation.
  • Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
  • Motor is held in place by four screws. Easily removed if service is ever needed.




Specifications  · Construction Material  · Agency Approvals

Specifications

Head
70 ft
21.3 m

Solids Handling Capacity
2 in. (diameter)
50.8 mm

Liquids Handling
Domestic Sewage and Drain Water

Intermittent Liquid Temperature
up to 140 ºF
up to 60 ºC

Available Motors
1/2 to 2 HP, 208, 230 volts, 1Ø
200, 230, 460, 575 volts, 3Ø
oil-filled, permanent split capacitor type, 1Ø
3450 rpm, 60 Hz

Motor Insulation
Class B (130°C)

Acceptable pH Range
6 to 9

Specific Gravity
0.9 to 1.1

Viscosity
28 to 35 SSU

Discharge, NPT
2 in
50.8 mm

Minimum Sump Diameter (Simplex)
24 in
61 cm

Minimum Sump Diameter (Duplex)
36 in
91.4 cm

Speed
3450 rpm

Power
1/2 to 2 hp

Capacity
165 gpm
624 lpm


Construction Material

Motor Housing Material
Cast Iron, Class 30, ASTM A48

Impeller Wear Ring Material
304 SST

Standard Enclosed 2-Vane Impeller Material
Cast Iron, Class 30, ASTM A48

Optional Enclosed 2-Vane Impeller Material
Bronze

Volute Material
Cast Iron, Class 30, ASTM A48

Volute Seal Ring Material
Buna-N

All 1 Phase Power Cord Material
20 ft. 14/3 SJOW

All 3 Phase Power Cord Material
20 ft. 14/4 SOOW

Shaft Material
416 SST

Standard Shaft Seal Material
Single Carbon & Ceramic

Optional Shaft Seal Material
Tandem Carbon & Ceramic

Optional Lower Shaft Seal Material
Tungsten Carbide

Fasteners Material
300 series SST


Agency Approvals

Agency Approvals


 MORE IMAGES 

·  Dimensions (Myers® MW Series 2 in Solids Handling Sewage Pumps)

·  Pump Performance (Myers® MW Series 2 in Solids Handling Sewage Pumps)

·  Specifications (Myers® MW Series 2 in Solids Handling Sewage Pumps)


 DOWNLOADS 

MW Series 2 in Solids Handling Sewage Pumps
(PDF, 915KB)


Request Quote