Rapid Pump & Meter Service Co., Inc.
285 Straight Street
P.O. Box AY
Paterson, NJ, 07509 USA
Phone:973.345.5600 • Fax: 973.345.0301
Email: info@servicer.com
• Website:
www.rapidservice.com
|
|
|
Item # MW, Myers® MW Series 2" Solids Handling Sewage Pumps
|
|
|
|
|
|
Capacity : 165 gpm (641 lpm)
Head : 70 ft (21.3 m)
Single and Double Seal
The heavy-duty Myers MW Series Sewage Pumps are designed for use in light commercial and residential raw sewage applications. MW pumps will pass a full 2” sphere. The enclosed two-vane impeller provides high efficiency pumping and will handle stringy trashy solids normally found in raw sewage applications. Ideal for a variety of sewage applications ranging from private household to light commercial installations. Available in double seal configuration for extended motor life.
Advantages By Design
Ideal for use in residential and light commercial sewage applications- High efficiency, two-vane, enclosed impeller provides ideal pump performance.
- Impeller passes full 2 inch solids.
- Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
Durable motor will deliver many years of reliable service.- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
- Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
- Motors have on winding current and temperature sensitive overload. (Single phase only.)
The MW series sewage pumps are designed for years of maintenance free operation.- Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
- Motor is held in place by four screws. Easily removed if service is ever needed.
|
|
|
|
|
|
Head
|
|
70 ft
21.3 m
|
|
|
|
Solids Handling Capacity
|
|
2 in. (diameter)
50.8 mm
|
|
|
|
Liquids Handling
|
|
Domestic Sewage and Drain Water
|
|
|
|
Intermittent Liquid Temperature
|
|
up to 140 ºF
up to 60 ºC
|
|
|
|
Available Motors
|
|
1/2 to 2 HP, 208, 230 volts, 1Ø
200, 230, 460, 575 volts, 3Ø
oil-filled, permanent split capacitor type, 1Ø
3450 rpm, 60 Hz
|
|
|
|
Motor Insulation
|
|
Class B (130°C)
|
|
|
|
Acceptable pH Range
|
|
6 to 9
|
|
|
|
Specific Gravity
|
|
0.9 to 1.1
|
|
|
|
Viscosity
|
|
28 to 35 SSU
|
|
|
|
Discharge, NPT
|
|
2 in
50.8 mm
|
|
|
|
Minimum Sump Diameter (Simplex)
|
|
24 in
61 cm
|
|
|
|
Minimum Sump Diameter (Duplex)
|
|
36 in
91.4 cm
|
|
|
|
Speed
|
|
3450 rpm
|
|
|
|
Power
|
|
1/2 to 2 hp
|
|
|
|
Capacity
|
|
165 gpm
624 lpm
|
|
|
|
|
|
|
|
|
|
Agency Approvals
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
