Capacity : 215 gpm (814 lpm)
Head : 70 ft (20.9 m)

Single Seal

The WHR5H-WHR20H Series Pumps are designed for use in light commercial and residential raw sewage and effluent applications. They deliver higher heads than standard sewage pumps and will pass 2 inch solids. Recessed vortex impeller provides an unobstructed passage in the volute case, allowing the pump to handle stringy trash without plugging the impeller.

Advantages By Design
Durable Motor Will Deliver Many Years Of Reliable Service.
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • Recessed vortex impeller reduces radial bearing loads, increases bearing life.
  • Single phase PSC motors have no starting switch.
Non-Clog Operation
  • Recessed vortex impeller passes 2" solids.
  • Impeller operates completely out of volute passage
  • Passes stringy trash and other solids which conventional semi-open impellers can't.
Unit of Measure



N/A 70 ft20.9 m

Liquids Handling

N/A Raw and Effluent Sewage

Intermittent Liquid Temperature

N/A up to 140 ºFup to 60 ºC

Winding Insulation Temperature. (Class B)

N/A 266 ºF130 ºC

Motor Electrical Data

N/A 1/2, 1, 1 1/2, 2HP, 3450 RPM 115, 208/230V 1Ø, 60 Hz PSC 200/230/460/575V, 3Ø, 60 Hz

Acceptable pH Range

N/A 6 to 9

Specific Gravity

N/A 0.9 to 1.1

Discharge, NPT

N/A 2 in50.8 mm

Discharge, NPT (Optional)

N/A 3 in76.2 mm

Minimum Sump Diameter (Simplex)

N/A 24 in61 cm

Minimum Sump Diameter (Duplex)

N/A 30 in91.4 cm


N/A 2 hp


N/A 460 V


N/A 3


N/A 60 Hz


N/A 23 A18.3 kV·A

Maximum Current

N/A 4.5 A

Maximum Electrical Power

N/A 3.6 kV·A

Maximum Output Power

N/A 3.3 kW

NEC Code Letter



N/A 215 gpm814 lpm


N/A Consult factory for applications outside of these recommendations.

Construction Material

Motor Housing Material

N/A Cast Iron

Volute Case Material

N/A Cast Iron

Power Cord Material

N/A 1Ø, 20' SJOOW/SJOOW-A 3Ø, 20' SOOW Single Seal

Mechanical Seal Material

N/A Carbon & Ceramic, Single, Type 21

Pump Shaft Material

N/A 416 SST

Motor Shaft Material

N/A 416 SST

Agency Approvals

Agency Approvals