Search our Catalog:
Search
The answer is yes what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Sumps and Sewages > item-3336  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Myers® P50 and P100 Series Effluent S.T.E.P. Pumps


Myers® P50 and P100 Series Effluent S.T.E.P. Pumps

larger image
Capacity : 60 gpm (227 lpm)
Head : 124 ft (37.8 m)

1/2 and 1 HP

The Myers P Series Effluent Pumps are designed specifically for today's multi-pump pressure collection and septic tank effluent pumping (S.T.E.R) systems and high head drainage applications. The P Series effluent pumps with their high efficiency single vane, enclosed impellers provide the steep non-overloading performance curves ideal for pressure collection and S.T.E.P systems. Myers 1/2 and 1 horsepower P Series pumps deliver more capacity at higher heads than most 1,1 1/2 and 2 horsepower pumps in their class. Myers P Series pumps are constructed of only the highest quality corrosion resistant materials like cast iron, stainless steel and thermoplastics to assure that they will perform for years to come in the harsh effluent environment end drainage applications.

Advantages By Design
Optimum performance for use in multi-pump pressure collection and S.T.E.P. systems
  • High efficiency, single vane, enclosed impeller provides non-overloading performance over entire range. Outperforms most pumps in its class.
  • Impeller passes 3/4 inch spherical solids.
  • Enclosed impeller design eliminates possibility of jamming or corrosion between impeller and volute.
Durable motor will deliver many years of reliable service
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
  • Double tandem seal option for extra motor protection, tough effluent pumping applications.
  • Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
  • On-winding current and temperature sensitive overload to protect against costly burnout due to overload.
The P series effluent pumps are designed for years of maintenance free operation
  • Volute seal ring is replaceable. Restores pump to original performance if wear should occur.
  • Motor is held in place by four screws. Easily removed if service is ever needed.




Specifications  · Construction Material  · Agency Approvals

Specifications

Head
124 ft
37.8 m

Maximum Spherical Solids
3/4 in
19 mm

Liquids Handling
Domestic Effluent & Drain Water

Intermittent Liquid Temperature
up to 140 ºF
up to 60 ºC

Motor Electrical Data
1 hp, 230 volts, 1 ph
oil-filled, permanent split capacitor type, 3450 rpm, 60 Hz
1/2 hp, 115 or 230 volts, 1 ph
oil-filled, permanent split capacitor type, 3450 rpm, 60 Hz

Motor Insulation
Class B(130°C)

Acceptable pH Range
6 to 9

Specific Gravity
0.9 to 1.1

Viscosity
28 to 35 SSU

Discharge, NPT
1 1/2 in
38.1 mm

Minimum Sump Diameter (Simplex)
24 in
61 cm

Minimum Sump Diameter (Duplex)
36 in
91.4 cm

Speed
3450 rpm

Power
1 hp
1/2 hp

Capacity
60 gpm
227 lpm


Construction Material

Motor Housing Material
Cast Iron, Class 30, ASTM A48

Volute Material
Cast Iron, Class 30, ASTM A48

Enclosed Single Vane Impeller Material
Engineered Thermoplastic

Impeller Wear Ring Material
304 SST

Power Cord Material
20 ft. 16/3 SJOW/SJOW-A

Volute Seal Ring Material
Buna-N

Shaft Material
416 SST

Standard Shaft Seal Material
Single Carbon & Ceramic

Optional Lower Shaft Seal Material
Tungsten Carbide

Fasteners Material
300 series SST


Agency Approvals

Agency Approvals


 MORE IMAGES 

·  Dimensions (Myers® P50 and P100 Series Effluent S.T.E.P. Pumps)

·  Pump Performance (Myers® P50 and P100 Series Effluent S.T.E.P. Pumps)

·  Specifications (Myers® P50 and P100 Series Effluent S.T.E.P. Pumps)


 DOWNLOADS 

P50 and P100 Series Effluent S.T.E.P. Pumps
(PDF, 411KB)


Request Quote