Search our Catalog:
Search
The answer is yes what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Sumps and Sewages > Item # MW50  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # MW50, Myers® MW50 Series 2" Solids Handling Sewage Pumps


Myers® MW50 Series 2 in Solids Handling Sewage Pumps

larger image
Capacity : 135 gpm (510 lpm)
Head : 27 ft (8.23 m)

1/2 Horsepower

The Myers MW50 Series Sewage Pumps provide big performance in a small package. The enclosed two-vane impeller provides the flow and head required for residential and light commercial sewage applications, and passes a full 2" diameter solid. The MW50 is constructed of only the highest quality corrosion resistant materials - cast iron, stainless steel and engineered thermoplastics - for many years of service in harsh sewage environment. The MW50 is available in manual models for use with external controls or automatic models with piggyback mechanical float.

Advantages By Design
Two vane impeller design provides maximum efficiency
  • Enclosed design for high efficiency pump.
  • Eliminates possibility of jamming between impeller and volute.
  • Passes a full 2 inch solid.
  • Original performance can be restored if wear occurs by replacing volute seal ring.
Durable motor will deliver many years of reliable service
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • Permanent split capacitor motor eliminates starting switches and relays which are prone to fail.
The MW50 is designed for many years of maintenance free operation
  • Positive sealing, quick connect power cord and piggyback float switch make replacement simple if service is ever necessary.
  • Field tested, wide angle, mercury-free mechanical float switch provides maximum draw down. (Automatic models only.)
  • Long flexible Type 6 seal provides high pressure sealing with improved seal face protection by location.
  • Lower ball bearing eliminates sleeve bearing wear and significantly reduces motor wear.
  • Low amp draw from the efficient PSC motor means less heat build-up.




Specifications  · Construction Material  · Agency Approvals

Specifications

Head
27 ft
8.23 m

Solids Handling
2 in
50.6 mm

Liquids Handling
Domestic Sewage and Drain Water

Intermittent Liquid Temperature
140 ºF
60 ºC

Motor Electrical Data
1/2 hp, 1625 rpm, PSC
115 volt, 9.0 amp, 1Ø, 60 Hz
1/2 hp, 1625 rpm, PSC
230 volt, 4.5 amp, 1Ø, 60 Hz

Acceptable pH Range
6 to 9

Specific Gravity
0.9 to 1.1

Viscosity
28 to 35 SSU

Discharge, NPT
2 in
50.8 mm

Minimum Sump Diameter (Simplex)
24 in
61 cm

Minimum Sump Diameter (Duplex)
36 in
91.4 cm

Speed
1625 rpm

Power
1/2 hp

Capacity
135 gpm
510 lpm


Construction Material

Motor Housing Material
Cast Iron, Class 30, ASTM A48

Motor Bearing Material
Ball Bearing-Lower, Top-Sleeve

Impeller Wear Ring Material
304 SST

Enclosed 2-Vane Impeller Material
Engineered Thermoplastic

Volute Material
Thermoplastic

Volute Seal Ring Material
HUVA Cup

Power Cord Material
20 ft. 16/3 SJTW/SJTW-A

Control Cord Material
20 ft. 16/3 SJTW/SJTW-A

Mechanical Seal Material
Type 6 - Carbon/Ceramic

Fasteners Material
300 series SST


Agency Approvals

Agency Approvals


 MORE IMAGES 

·  Dimensions (Myers® MW50 Series 2 in Solids Handling Sewage Pumps)

·  Pump Performance (Myers® MW50 Series 2 in Solids Handling Sewage Pumps)

·  Specifications (Myers® MW50 Series 2 in Solids Handling Sewage Pumps)


 DOWNLOADS 

MW50 Series 2 in Solids Handling Sewage Pumps
(PDF, 385KB)


Request Quote