The answer is yes 
what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
All Categories > Industrial Pumps & Meters > Myers® Pumps > Myers® Solids Handling Pumps > Myers® 8SMDP and 8SMXDP Series 8" Submersible Non-Clog Wastewater Pumps > Item # 8SMDP1250M4-43  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 8SMDP1250M4-43, Standard 8" Submersible Non-Clog Wastewater Pumps



Capacity : 2,320 gpm (8,800 lpm)
Head : 260 ft (79 m)

Submersible Dry Pit


Standard (8SM) and Explosion-Proof (8SMX) Construction

The Myers 8SMDP Submersible Dry Pit Non-clog Sewage Pumps are designed especially for high flow applications such as: large municipal stations, treatment plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump
  • Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
  • Produces high heads and flows
Durable motor will deliver many years of reliable service
  • Class H insulation.
  • Continuous duty/VFD magnet wire.
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • Internal thermal overload protection.
  • Double tandem shaft seals prevent sewage from entering motor.
  • Internal seal leak probes warn of moisture entry.
  • Triple sealed power and control cables.





Specifications  · Construction Material  · Agency Approvals

Specifications

Head

260 ft
79
m

Solids Handling

3 in
76
mm

Liquids Handling

Drain Water
Effluent

Raw Unscreened Sewage

Intermittent Liquid Temperature

up to 140 ºF
up to 60
ºC

Winding Insulation Temperature. (Class H)

356 ºF
180
ºC

Available Motors

1750RPM
75, 100, 125 HP
460 & 575 volt
3 phase, 60 Hz

Acceptable pH Range

6 to 9

Specific Gravity

0.9 to 1.1

Viscosity

28 to 35 SSU

Horizontal Discharge

8 in
203.2
mm

Speed

1750 rpm

Power

125 hp

Voltage

460 V

Phase

3

Frequency

60 Hz

Start

725 A
578
kV·A

Run

165.0 A
108.0
kW
131.0
kV·A

NEC Code Letter

G

Service Factor

175.0 A
115.0
kW
1.1

Capacity

2,320 gpm
8,800
lpm

Note

Consult factory for applications outside of those recommendations.


Construction Material

Motor Housing Material

Cast Iron, Class 30, ASTM A48

Seal Housing Material

Cast Iron, Class 30, ASTM A48

Volute Case Material

Cast Iron, Class 30, ASTM A48

Cord Cap Material

Cast Iron, Class 30, ASTM A48

Impeller Material

Ductile Iron, Class 65 ,ASTM A536

Power Cord Material

25 ft. SOOW

Control Cord Material

25 ft. SOOW

Standard Double Tandem Mechanical Seal Material

Carbon & Ceramic

Optional Double Tandem Mechanical Seal Material

Lower Tungsten, Carbide

Pump Shaft Material

416 SST

Motor Shaft Material

416 SST

Fasteners Material

300 series SST

Case Wear Ring Materials

Bronze

Base Elbow Material

Cast Iron, Class 30 ,ASTM A48


Agency Approvals

Agency Approvals1

1 Pending


 MORE IMAGES 

·  Pump Features (Myers® 8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps)

·  Dimensions (Myers® 8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps)

·  Pump Performance (Myers® 8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps)

·  Motor Efficiencies and Power Factor (Myers® 8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps)

·  Specifications (Myers® 8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps)


 DOWNLOADS 

8SMDP and 8SMXDP Series 8 in Submersible Non-Clog Wastewater Pumps
(PDF, 231KB)