The answer is yes 
what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Solids Handling Pumps > Myers® 4VLDP and 4VLXDP Series 4" High Head Non-Clog Wastewater Pumps > Item # 4VLXDP750M4-53  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # 4VLXDP750M4-53, Explosion-proof 4" High Head Non-Clog Wastewater Pumps



Capacity : 2,100 gpm (8,000 lpm)
Head : 275 ft (84 m)

Submersible Dry Pit


Standard (4VLDP) and Explosion-Proof (4VLXDP)

The Myers 4VLDP Submersible Dry Pit Non-clog Sewage Pumps are designed especially for high flow applications such as: municipal stations, treatment plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump

  • Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
  • Produces high head.

Durable motor will deliver many years of reliable service

  • Class H insulation.
  • Continuous duty/VFD magnet wire.
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • Internal thermal overload protection.
  • Double tandem shaft seals prevent sewage from entering motor.
  • Internal seal leak probes warn of moisture entry.
  • Triple sealed power and control cables.





Specifications  · Construction Material  · Agency Approvals

Specifications

Head

275 ft
84
m

Solids Handling

3 in
76
mm

Liquids Handling

Drain Water
Effluent

Raw Unscreened Sewage

Intermittent Liquid Temperature

up to 140 ºF
up to 60
ºC

Winding Insulation Temperature. (Class H)

356 ºF
180
ºC

Available Motors

1750 RPM
50, 60, 75, 100, 125 HP
460 & 575 volts
3Ø, 60 Hz

Acceptable pH Range

6 to 9

Specific Gravity

0.9 to 1.1

Viscosity

28 to 35 SSU

Horizontal Discharge

4 in
101.6
mm

Speed

1750 rpm

Power

75 hp

Voltage

575 V

Phase

3

Frequency

60 Hz

Start

432 A
430
kV·A

Run

81.4 A
64.2
kW
81.0
kV·A

NEC Code Letter

G

Service Factor

97.8 A
77.0
kW
1.2

Capacity

2,100 gpm
8,000
lpm

Note

Consult factory for applications outside of these recommendations.
FM Class 1, Group C & D


Construction Material

Motor Housing Material

Cast Iron, Class 30, ASTM A48

Seal Housing Material

Cast Iron, Class 30, ASTM A48

Volute Case Material

Cast Iron, Class 30, ASTM A48

Cord Cap Material

Cast Iron, Class 30, ASTM A48

Impeller Material

Ductile Iron, Class 65, ASTM A536

Power Cord Material

25 ft. SOOW

Control Cord Material

25 ft. SOOW

Standard Double Tandem Mechanical Seal Material

Carbon & Ceramic

Optional Double Tandem Mechanical Seal Material

Lower Tungsten, Carbide

Pump Shaft Material

416 SST

Motor Shaft Material

416 SST

Fasteners Material

300 series SST

Case Wear Ring Materials

Bronze

Base Elbow Material

Cast Iron, Class 30, ASTM A48


Agency Approvals

Agency Approvals1

1 Pending


 MORE IMAGES 

·  Dimensions (Myers® 4VLDP and 4VLXDP Series 4 in High Head Non-Clog Wastewater Pumps)

·  Pump Performance (Myers® 4VLDP and 4VLXDP Series 4 in High Head Non-Clog Wastewater Pumps)

·  Motor Efficiencies and Power Factor (Myers® 4VLDP and 4VLXDP Series 4 in High Head Non-Clog Wastewater Pumps)

·  Specifications (Myers® 4VLDP and 4VLXDP Series 4 in High Head Non-Clog Wastewater Pumps)


 DOWNLOADS 

4VLDP and 4VLXDP Series 4 in High Head Non-Clog Wastewater Pumps
(PDF, 1366KB)


Request Quote