The answer is yes 
what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Pumps > Myers® Pumps > Myers® Solids Handling Pumps > Myers® 3RH and 3RHX Series 3" Non-Clog Wastewater Pumps > Item # 3RH50M2-01  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # 3RH50M2-01, Standard 3" Non-clog Wastewater Pumps



Capacity : 315 gpm (19.9 lps)
Head : 100 ft (30.4 m)


Standard (3RH) and Explosion-Proof (3RHX) Construction

Myers 3RH and 3RHX (explosion-proof) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected.The 3RH/3RHX series provides smooth, vibration-free operation when operating at heads higher than peek efficiency. For use in commercial lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
Passes Stringy Trash, Fibrous Wastes, Slurries, and other difficult to pump Solids that standard enclosed or semi-open Impellers can not.

  • Recessed impeller design has completely open passage in volute.
  • Pumping action is by Vortex; solids can not get caught in impeller volute.
  • Operates without vibration or cavitation over entire performance curve. Operates near shut-off without harming pump.

Durable motor will deliver many years of reliable service.

  • Recessed impeller greatly increases bearing life by reducing radial load.
  • Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
  • Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
  • Seal leak probes warn of moisture entry; helps prevent costly motor burnout.

Available with optional F.M. approval for use in class 1, Groups C and D hazardous locations (3RHX only)






Specifications  · Construction Material  · Agency Approvals

Specifications

Head

100 ft
30.4
m

Liquids Handling

Effluent
Fibrous Wastewater

Raw Unscreened Sewage

Storm Water

Solids Handling (Diameter)

2 in
50.8
mm

Intermittent Liquid Temperature

up to 140 ºF
up to 60
ºC

Winding Insulation Temperature. (Class F)

311 ºF
155
ºC

Motor Electrical Data

3450 RPM
3-5 HP 230V 1Ø, 60 Hz

3-7 1/2 HP 200/230/460/575V, 3Ø, 60 Hz

Acceptable pH Range

6 to 9

Specific Gravity

0.9 to 1.1

Viscosity

28 to 35 SSU

Horizontal Discharge Flanged Centerline

125 lb. ANSI
3 in

76
mm

Power

5 hp

Voltage

200 V

Phase

1

Frequency

60 Hz

Start

135.0 A
27.0
kV·A

Run

29.3 A
5.2
kW
5.9
kV·A

NEC Code Letter

F

Service Factor

33.4 A
5.8
kW
1.2

Capacity

315 gpm
19.9
lps

Note

Consult factory for applications outside of these recommendations


Construction Material

Motor Housing Material

Cast Iron, Class 30, ASTM A48

Seal Housing Material

Cast Iron, Class 30, ASTM A48

Volute Case Material

Cast Iron, Class 30, ASTM A48

Cord Cap Material

Cast Iron, Class 30, ASTM A48

Recessed Impeller Material

Ductile Iron, Class 65, ASTM A536

Power Cord Material

25 ft. SOOW

Control Cord Material

25 ft. SOOW

Standard Double Tandem Mechanical Seal Material

Carbon & Ceramic, Type 21

Optional Double Tandem Mechanical Seal Material

Lower Tungsten, Carbide

Pump Shaft Material

416 SST

Motor Shaft Material

416 SST

Fasteners Material

300 series SST


Agency Approvals

Agency Approvals



 MORE IMAGES 

·  Dimensions (Myers® 3RH and 3RHX 3 in. Non-Clog Wastewater Pumps)

·  Pump Performance (Myers® 3RH and 3RHX 3 in. Non-Clog Wastewater Pumps)

·  Motor Efficiencies and Power Factor (Myers® 3RH and 3RHX 3 in. Non-Clog Wastewater Pumps)

·  Specifications (Myers® 3RH and 3RHX 3 in. Non-Clog Wastewater Pumps)


 DOWNLOADS 

3RH and 3RHX 3 in. Non-Clog Wastewater Pumps
(PDF, 244KB)


Request Quote