Item # BD200, Blue Ribbon Bulldog BD200 Setpoint Pump Controllers

Dual setpoint controller that is easy to program. Controls submersible pumps in lift stations, and is designed to field calibrate the Birdcage Level Sensor.

Standard Features

• Selectable pump alternation when used with two pumps to minimize pump wear. With alternation "On", a seal failure or over-temperature condition will force the non-failed pump to lead status and stop alternation.
• Alarm light for seal failure when used with a sumersible pump that includes a moisture sensor.
• Alarm light for overheating when used with a pump that includes a thermostat. Pump is removed from service and can be brought back online manually or automatically when pump has cooled down.
• Runtime displayed by a front panel button.
• 24 VDC power for level transmitter
• 4 - 20 mA or voltage signal
• Nonvolatile memory, no batteries
• Test System function that simulates the process input to test programming or to insure the pumps are operating.
• User-selectable security lock-out of programming and/or setpoints.

The Bulldog BD200 Pump Controller provides versatile level control in a standard 1/4 DIN package.

This controller is versatile, simple, and inexpensive making it the ideal instrument for controlling dual pump lifting stations. Setpoints for ON/OFF and HI/LO alarms are easily set on the front panel. These same buttons also Enable/Disable pump alternation. Selectable time delay up to 60 seconds on power up for pump two prevents both pumps from starting at the same time and a large current draw. Alarms for pump seal failure and motor windings overheating are indicated by lights on the front panel. The dial can also display a runtime clock for each pump. An isolated 4-20 mA retransmission is standard. The front face is rated NEMA-4X for outdoor panel mounting. The BD-200 is also available with RS-232 or RS-485 protocol for connectivity with SCADA systems.