Search our Catalog:
Search
The answer is yes what is the question? VisaMastercardDiscover Visa, Mastercard, and
Discover Accepted
View RFQs Express Ordering
 R 0 Items
All Products > All Products > Controls > Blue Ribbon > Blue Ribbon Controllers > Item # BD100  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # BD100, Blue Ribbon Bulldog BD100 Setpoint Pump Controllers


Blue Ribbon Bulldog BD100 Setpoint Pump Controller

larger image
Dual setpoint controller that is easy to program. Controls submersible pumps in lift stations, and is designed to field calibrate the Birdcage Level Sensor.

Standard Features:
  • Control ON-OFF for two pumps
  • Front-panel programming
  • Analog output for run times.
  • Secure menu for all other pre-set values
  • 24 VDC power for sensor
  • Accepts 4 - 20 mA or 1-5 VDC
  • Nonvolatile memory, no batteries
  • Alternation of pumps set as default
  • Setpoints continuously displayed, along with current level readings
The Bulldog is a setpoint controller designed primarily to accept the 4 - 20 mA output signal from the Birdcage level sensor, turn pumps on and off, and control alarm outputs.

This controller is simple and inexpensive. It is so simple that even the least-trained operator can program six standard level setpoints for the control of the pumps -the on/off setpoints for the two pumps and the settings for the two alarms. That's it! Everything else is defaulted to a secure menu, pre-programmed for the customer. Everything is readily available in case you have to change range or decimal placement, suppress the zero, or turn off the alternation, etc.
The flexibility and variety of options in the secure menu will be applauded by engineers, while the operators will never have to learn those programming steps. Nothing could be easier!





Specifications

Setpoint Range
Low and High points are selected independently

Display
Two 4 digit, 7 segment, 14.2mm (0.56") high LED's

Control Action
Selectable for Reverse (pump up) or Direct (pump down); Selectable for alternation or not

Control Output Ratings
Relays: 2 each SPDT, 10A@ 240 VAC resistive, 1/2 hp @ 120 VAC, 1/3 hp @ 240 VAC Alarm Relays: 2 each SPST 3A @ 240 VAC resistive, 1.5A @ 240 VAC inductive, pilot duty rating: 240 VA 2A @ 120 VAC or 1A @ 240 VAC

Additional Outputs
Two switched voltage outputs mirror action of relays, for recording motor start cycles and run times

Accuracy
± 0.0025% of reading ± 1 least significant digit

Resolution
1 count or 0.1 counts (sensor dependent)

Isolation
Relays and SSR outputs, 1500 VAC from all inputs and outputs; 24 VDC loop power, 500 VAC to all inputs and outputs

Power Consumption
5 VA maximum

Electrical Supply
100 to 240 VAC nominal, +10% to 15%, 50 to 400 Hz single phase; 132 to 240 VDC +10% to 20%

Loop Powered Supply
isolated +24 VDC supplies power to the Birdcage or Pressure Sensor

Operating Temperature Range
10 to 55 ºC
-14 to 130 ºF

Storage Temperature Range
-40 to 80 ºC
-40 to 175 ºF

Humidity Range
0 to 90% up to 40ºC for non-condensing

Memory Backup
Non-volatile memory, no batteries

Panel Cutout
92 x 92 mm
3.625 x 3.625 in

Depth Behind Mounting Surface
103 mm
4.0 in

Weight
454 g
16 oz

Front Panel Rating
IP66 (Type NEMA 4X)


 DOWNLOADS 

Bulldog BD100 Setpoint Pump Controller
(PDF, 71KB)


Request Quote