Capacity : 50 gpm
Head : 480 ft


1/2, 3/4, 1 and 1 1/2 HP
8, 12, 20, 25, 30 and 35 GPM
4" Diameter Submersibles

Myers high head filtered effluent pumps are designed specifically for high pressure applications. The high performance, high head pumps are proven to be cost effective solutions for pumping filtered effluent from processed wastewater systems.

Advantages By Design
  • High pressure capacity.
  • Corrosion resistant design for long life.
  • CSA-CUS listed.
    (25 and 35 GPM CSA only.)
  • Dependable field proven motor.
    - Stainless steel construction
    - Built-in overload and electric surge protection
    - Replaceable 10' jacketed power cord
    - Hermetically sealed windings
    - Continuous duty rating
  • Frequent cycling capabilities.
    - 1/2 and 3/4 HP - 300 starts/24 hours
    - 1 and 1 1/2 HP -100 starts/24 hours
  • Powerful, yet lightweight.
  • Easy handling and installation.
Unit of Measure

Specifications

Head

N/A 480 ft

Maximum Spherical Solids

N/A 1/16" Diameter

Liquids Handling

N/A Filtered Effluent

Maximum Liquid Temperature

N/A 122 ºF

Motor Electrical Data

N/A 1/2 HP 115 volts, 1 ph
60 Hz, 3450 RPM
1/2 to 1-1/2 HP, 230 volts, 1 ph
60 Hz, 3450 RPM

Motor Rating

N/A Continuous Duty

Maximum Motor Starts/24 Hours

N/A 300

Specific Gravity

N/A 0.9 to 1.1

Viscosity

N/A 28 to 35 SSU

Discharge Size NPT

N/A 1 1/4 in

Overall Pump Height (A)

N/A 24 1/4 in

Motor Height (B)

N/A 9 1/2 in

Intake Height (C)

N/A 12 in

Pump End Height (D)

N/A 14 3/4 in

Bypass Orifice Height (E)

N/A 20 3/4 in

Minimum Liquid Level (M)

N/A 19 1/2 in

Power

N/A 1/2 hp

Voltage

N/A 230 V

Maximum Current

N/A 6.0 A

Locked Rotor

N/A 32 A

Winding Resistance

N/A 4.2 - 5.2 Ω

Maximum Fuse/CB

N/A 15
AWG Copper Wire Size1 N/A 1020 ft. @10AWG Copper Wire ft1610 ft. @8AWG Copper Wire ft2510 ft. @6AWG Copper Wire ft3880 ft. @4AWG Copper Wire ft400 ft. @14AWG Copper Wire ft650 ft. @12AWG Copper Wire ft

Capacity

N/A 8 gpm

Corrosion Resistant Pump Construction

Pump Shell Material

N/A 300 series SST

Shaft Material

N/A 300 series SST

Coupling material

N/A 300 series SST

Suction Bowl Material

N/A Chemically Resistant Reinforced Nylon

Discharge Bowl Material

N/A Corrosion Resistant Reinforced Polycarbonate

Staging Material

N/A Premier PTFE Reinforced Polyester

Built-in Check Valve

N/A Premier PTFE Reinforced Polyester

Thrust Washers Material

N/A Phenolic

Fasteners Material

N/A 300 series SST

Impeller Wear Ring Material

N/A 300 series SST

Corrosion Resistant Motor Construction

Motor Shell Material

N/A SST

End Caps Material

N/A SST

Spline Shaft Material

N/A SST

Electrical Protection

N/A Built-in Overload and Surge Arrestor

Replaceable Motor Lead Wire Assembly

N/A 14-3 Jacketed Type SJOW-A
UL and CSA Recognized

Windings

N/A Hermetically Sealed

Motor Mounting

N/A NEMA

Agency Approvals

Agency Approvals

N/A

  • 1 Maximum length of copper wire in feet. For aluminum wire, select one size larger (i.e. No. 8 aluminum for No. 10 copper)