Capacity : 31 gpm (117 lpm)
Head : 23 ft (7 m)
The Myers SSM33I is a rugged, heavy duty cast iron 1/3 hp Submersible Pump designed for demanding drainage jobs. The SSM33I's recessed, vortex impeller provides a clear, unobstructed passage in the volute case for superior solids handling. Its 1/2" solids handling capability allows it to be used in a wide variety of drainage and effluent pumping applications. Heavy duty cast iron construction ensures that the SSM33I will perform for years to come in most installations.
Advantages By Design
Durable motor will deliver many years of reliable service.
Head : 23 ft (7 m)
The Myers SSM33I is a rugged, heavy duty cast iron 1/3 hp Submersible Pump designed for demanding drainage jobs. The SSM33I's recessed, vortex impeller provides a clear, unobstructed passage in the volute case for superior solids handling. Its 1/2" solids handling capability allows it to be used in a wide variety of drainage and effluent pumping applications. Heavy duty cast iron construction ensures that the SSM33I will perform for years to come in most installations.
Advantages By Design
Durable motor will deliver many years of reliable service.
- Oil-filled motor for maximum heat dissipation and continuous bearing lubrication.
- Shaded pole motor eliminates starting switches.
- Recessed vortex impeller provides free flow-through passage for solids and liquid with minimal radial loading for long bearing life.
- Automatic models available with piggy-back float or vertical switch. (Both mercury free)
- Pump can be operated manually by unplugging piggy-back switch and plugging pump directly into outlet (Automatic models).
- Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life and resist corrosion.
Unit of Measure
Specifications
Head |
N/A 23 ft7.0 m |
Float Switch Pump Down Range |
N/A 7 to 10 in178 to 254 mm |
Vertical Switch Pump Down Range |
N/A 4 1/8 in107 mm |
Solids Handling |
N/A 1/2 in12.8 mm |
Liquids Handling |
N/A Fresh Drain Water and Effluent |
Intermittent Liquid Temperature |
N/A up to 140 ºFup to 60 ºC |
Motor |
N/A 1/3 HP shaded pole 1550 RPM |
Electrical |
N/A 115V, 9.0 amps, 1Ø, 60 Hz. |
Acceptable pH Range |
N/A 5 to 9 |
Discharge, NPT |
N/A 1 1/2 in38.1 mm |
Minimum Sump Diameter |
N/A 12 in305 mm |
ETL Listing |
N/A
Class 1, Div. 2 Group D Class 2, Div. 2 Group F, G Class3, Div. 1, 2 |
Speed |
N/A 1550 rpm |
Power |
N/A 1/3 hp |
Voltage |
N/A 115 V |
Phase |
N/A 1 |
Frequency |
N/A 60 Hz |
Capacity |
N/A 31 gpm117 lpm |
Construction Material
Motor Housing Material |
N/A Cast Iron, Class 30, ASTM A48 |
Volute Case Material |
N/A Cast Iron, Class 30, ASTM A48 |
Pump Base Material |
N/A Cast Iron, Class 30, ASTM A48 |
Recessed Impeller Material |
N/A Thermoplastic |
Power Cord Material |
N/A 10 ft.,16/3SJTW/SJTW-A 20 ft.,16/3SJTW/SJTW-A |
Mechanical Seal Material |
N/A Carbon & Ceramic |