Convert to Electrical Output, Reliably.

Registers compatible with Master Meter 5/8" to 2" top load Multi-jet Cold or Hot Water Meters and 2" to 12" Turbine Meters providing single or double contact closure corresponding to defined volume increments.

Commonly used in water utility, industrial and agricultural installations where totalization is required at a site remote from the meter, and where precise volume input to batching equipment is required, for injection of chemicals, dyes or other additives.

Features & Benefits:
  • Great for water utility, industrial, and agricultural applications
  • Compatible with Master Meter 5/8" to 2" Multi-Jet Cold or Hot Water meters
  • Switch enclosed in a vacuum-sealed glass tube
  • Available as single or dual switch output for maximum flexibility
Unit of Measure

Technical Specifications

Technical Description

N/A Registers compatible with Master Meter 5/8" to 2" Multi-jet Cold or Hot Water Meters and 2" to 12" Turbine Meters providing single or double contact closure corresponding to defined volume increments.

Applications

N/A In utility, industrial & agricultural installations where:
  • Totalization is required at a site remote from the meter
  • Precise volume input to batching equipment is required

Switch Type

N/A Reed Switch Type Proximity Sensor. Dry contact switch.

Construction

N/A Permanently sealed, magnetic drive register, with stainless steel register base, plastic lens and wrap around gasket. A standard six-wheel mechanical odometer accommodates on-site reading when required. Single Switch Output: Switch is enclosed in a vacuum sealed glass tube. The switch assembly locks, with a bayonet fit, into a sealed cavity in the register. Dual Switch Output: Switches are enclosed in a vacuum sealed glass tube and permanently epoxy sealed in the register lens.

Output

N/A Quantity of water per switch closure varies with meter size. Output options include 1, 10 and 100 percent of register sweep, specified on order. Output options by meter size and registration are summarized on the reverse side of this bulletin.

Compatible Equipment

N/A Master Meter: LCD Remote Counter & Batching Unit. Other Equipment: Electrical/ electronic counters, totalizers, actuators, injection equipment and proportional feed pumps.

Wiring Distance

N/A Reed switch assembly is factory sealed to 3 feet of 24 gauge, 2-conductor stranded cable. Remote counting or batching equipment can be installed up to 200 feet from the meter, connected by 24 gauge, 2-conductor stranded cable.

Warranty

N/A Electrical Output registers are warranted for one year from shipment date.

Electrical Specifications

Maximum Switched Current

N/A 500 mA

Maximum Recommended Switching (AC or DC)

N/A 32 V

Contact Resistance

N/A 70 mOhms

Power Requirements

N/A Electrical output register consumes no power, making it suitable for use with low current, dry battery powered devices.

Warning

N/A We recommended contacts be kept within the stated parameters.